Diesel generator China professional manufacturer

  POWER WORLD  Manchinery Equipment Co., Ltd  a generator company of quality and reliability, offers domestic sale- services and worldwide export-services in brand-new generator and diesel engine sets.Diesel generator exhaust water engineering knowledge ,how it works:

   Diesel generator set is working, will generate a lot of exhaust gas temperatures as high as 500 degrees Celsius, according to Cummins's test report, per kWh of Cummins diesel generator emissions from an average of 14.151 cubic meters, the pressure is 10.2 KPa  .POWER WORLD diesel generator test conditions: Engine models: NT855-GA, NTA855-G1A, NTA855G2A, NTA855-G4, NTAA855-G7,running at rated power conditions for 24 hours, the temperature is 25 degrees Celsius a standard atmosphere,Generator set output range: 200 - 330kw (250 - 413KVA).
   Diesel engine exhaust heat energy loss of about 28% of POWER WORLD company has developed a gas hot water system to diesel engine exhaust can be recycled energy, according to our measured data, calculate the output of hot water for the proposed program:
Water capacity (Kg) = (x generator power generator generator load rate x hours x200) ÷ (hot water temperature - cold water temperature)
Based on our Cummins engine diesel generator  the system has the following features:
1.The enlarger louver can accommodate more air,then the exhuating area is bigger than other manufacturers.It seldom causes high water temperature of gensets.And it is good for gensets to work in hot  area.
2.Power World louver inside filled with fiber glass complex foam for better acounstic insulation.Other manufacturer just use the foam to fit up louver inside.Then the effect of sound isolation is not good as us.
3. Economy: low investment, energy-saving effect is remarkable
4.We have install crane lifting eyes at the top of soundproof,which is easy to be liffted and transported.This design can neen thicker top steel plate and firm soundproof.Other manufacturers seldom have the crane lifting eyes.
5.This is humanized design.Fork lift hole are convenient for customer to lift and transport gensets.
6.We install filling hole at the bottom of fuel tank.Customer could do the fuel filling through the filling hole instead of open the door of soundproof to do it.Other manufacturers always install these inside the soundproof.